Auto Adjustable EPS Block Moulding Machine

1.This machine applies PLC controller and touch screen control system to finish the autocycle process of opening-closing mould, feeding, heating, heat preservation, cooling, demoulding and releasing.
2.This machine is welded by high quality square profile steel and steel plate, which is subjected to heat treatment,to ensure the machine  has no deformation,and has high durability after being assembled.
3.This machine applies unique and advanced EPS heat penetration process,which make high quality plates whose six faces and interior are the same perfect.It also reaches remarkable energy saving effect.
4.Advanced EPS heat penetration technique,reasonable pipeline system and unique design construction, which improve productivity,and make this machine leading in domestic EPS industry.
5.Most of the main components are of world-famous brand,with reliable performance,stable quality,long service life and low maintenance cost.
6.This machine applies hydraulic pressure transmission, hydraulic ingot stripping,it makes steady running and tight locking.
7.High production efficiency.The production cycle of each plate is 4-8min.Automatic pneumatic charging shorten the production time.
8.The height of the inner dimension can be adjusted from 800-1220mm.

Item		LWB2000AF	LWB3000AF	LWB4000AF	LWB6000AF
Mould Cavity Size (mm)		2050x1240x630	3080x1240x630	4000x1240x630	6120x1240x1030
Block Size (mm)		2000 x (900-1200) x 600	3000 x (900-1200) x 600	4000 x (900-1200) x 600	6000 x (900-1200) x 1000
Steam	Entry	DN 150	DN 150	DN 150	DN 200
	Consumption	25~45 kg/cycle	45~56 kg/cycle	60~85 kg/cycle	95~120 kg/cycle
	Pressure	0.6~0.8Mpa	0.6~0.8Mpa	0.6~0.8Mpa	0.6~0.8Mpa
Compressed Air	Entry	DN 40	DN 40	DN 50	DN 65
	Consumption	1.5~2 m3/cycle	1.5~2.5 m3/cycle	1.8~2.5 m3/cycle	2~3 m3/cycle
	Pressure	0.6~0.8Mpa	0.6~0.8Mpa	0.6~0.8Mpa	0.6~0.8Mpa
Vacuum Cooling Water	Entry	DN 40	DN 40	DN 40	DN 40
	Consumption	0.4 m3/cycle	0.6 m3/cycle	0.8 m3/cycle	1 m3/cycle
	Pressure	0.2~0.4Mpa	0.2~0.4Mpa	0.2~0.4Mpa	0.2~0.4Mpa
Drainage	Vacuum drain	DN100	DN125	DN125	DN125
	Down steam drain	DN150	DN150	DN150	DN150
	Blower drain	DN100	DN100	DN150	DN150
Capacity		4 min/cycle	6 min/cycle	7 min/cycle	8 min/cycle
Connected Load/Power		23.75 KW	26.75Kw	28.5KW	37.75KW
Overall Dimension (mm)		5700x4000x3300	7200x4500x3500	11000x4500x3500	12600x4500x3500
Weight		8000 kg	9500 kg	15000 kg	18000 kg

Applications of Auto Adjustable EPS Block Moulding Machine

LONGWELL, with over 20 years experience, is one of the largest auto adjustable block moulding machine manufacturers and suppliers in China. With the help of advanced equipment and technology, all of our products are of high quality and low price. Welcome to buy the cheap customized machine from our factory.